2020 Weldcraft for sale in Mark's Marine Inc., Hayden, Idaho

Engine Maintenance Recommendations

​Engine Maintenance Recommendations

Owner's Manual

Your owner's manual is your first reference in proper maintenance. Be sure to follow the engine manufacturer's recommendations so that your boat will be ready to go whenever you are. These service recommendations are general service guidelines. Some motors may have more stringent service requirements.

Performing routine maintenance on your boat will significantly reduce the chance of a service issue interrupting your boating fun during our short boating seasons.

Some services can be pushed back one extra year, depending on the amount of use your boat gets in a year. Please check with our service staff if you have questions about if your boat has enough hours on it to warrant a scheduled service.

Our factory certified service team is ready to take care of regular maintenance and special repairs for you. Just call us at (208) 772-9038 to schedule your service work with one of our service professionals.

Routine Maintenance Chart

20 Hour Service (First Service) Annual Service or 100 hours Every Second Year or 200 hours Every Third Year or 300 hours
Outboard 4-Stroke
  • Computer Break-in
  • Change Oil
  • Examine Oil for improper break-in
  • Change Oil Filter
  • Engine Oil
  • Gear Lube
  • Oil Filter
  • Water Separating Fuel Filter

Service should be done in the Fall.

  • Water Pump Service

Service should be done in the Spring.

Outboard 2-Stroke

Check your owner's manual for break-in procedure

  • Gear Lube
  • Water Separating Fuel Filter

Service should be done in Fall

  • Water Pump Service

Service should be done in the Spring.

Stern Drive

Check your owner's manual for break-in procedure

  • Engine Oil
  • Gear Lube
  • Oil Filter

Service should be done in Fall

  • Water Pump Service

Service should be done in the Spring.

  • Outdrive Service
  • Pull Outdrive
  • A/R Service
  • Inspect Bellows
  • Replace Gaskets
Trailer
  • Check Lug Nuts
  • Ensure proper Tire Pressure
  • Verify Lights
  • Check Winch Strap
  • Check bearings and repack
Contact Us